Benefits of Installing Pipe Insulation in Factories

By James Reign | Pipe Work

Mar 03

factory pipe insulation installedPipe insulation refers to the acoustic or thermal insulation applied on pipework.  There are many benefits of using this in most places, particularly in factories.

Pipe insulation is something factories should take in seriously.  The truth is, many factories do not think much about its great benefits.  Suitable pipe insulation is considered a vital facet of the factory’s infrastructure.  This process does not only boost performance, it also gives protection against the possible damages that may happen from the high temperatures.

Why do factories need pipe insulation?

If you think your business needs pipe insulation system, you need to consult right away a professional.  Find out some things you must understand why pipe insulation is significant:

  1. To control condensation. Moisture is one factor that contributes to unexpected corrosion; therefore, it’s important to prevent the condensation forming in the pipework.

Pipe insulation controls the formation of condensation in the surface temperature that tends to vary from time to time. Condensation is stopped as long as the surface insulation is more than the dew point of the air temperature.  Insulation also incorporates the water vapour barrier preventing the vapour from going through the pipe insulation.

2.  To save energy. The flow of heat from the pipework becomes considerable when pipework runs at temperatures taken away from the ambient temperature. In most cases, flow of the heat can be undesirable. The use of thermal pipe insulation decreases heat flow and provides thermal resistance. Pipes that operate at higher-extreme temperature have more heat flow and thicker ones are used for greater possibility of energy savings.

3. To protect the workers. Insulation is a protection against the dangerous temperature. There’s potential injury to happen if the pipework is at low or high temperature.  Workers tend to get injury when they get into physical contact with the surface of the pipe with extreme temperature. Insulated surface creates less temperature bringing surface touch to be at safer condition for the laborers.

4. To control noise.  Pipework is a conduit for traveling noise from a certain place of the building to another part. Acoustic insulation hinders the noise transfer by damping the wall pipe.  It performs the acoustic decoupling as the pipe goes through the fixed floor or wall or each time pipe is being repaired mechanically.

5. To work on freezing pipe. Pipe insulation won’t stop the water from freezing in the pipework.  However, it can add up to the needed time before freezing happens. As a result, it reduces the dangers of the water to get frozen quickly. Because of this, insulating the pipework in danger of freezing may be used to lessen the potential risk of the pipe freezing.

Pipework radiates also the mechanical sound. From this condition, the noise breakout from wall pipe is obtained by the acoustic insulation integrating the greater-density noise barrier.

Generally, pipe insulation is helpful, inexpensive and quick to install in factories, even in homes.  Ensure that your insulation be properly installed and taken care of. It is always best to trust the experts who have gained knowledge in determining cold and hot pipework temperature.

About the Author